Main Menu Options; Stand-Alone Mode; Settings; Dmx-512 Mode - SHOWTEC Astro 360 RGBW V1 Manual

Astro 360 RGBW

Main Menu Options

1. Stand-alone mode

When this menu is active, the device will run the built-in color chase.
01) Press the MENU button until the display shows
02) The device will now run the built-in color chase.

2. Settings

01) When the display shows
02) The display will show
menu options:

2.1. DMX-512 mode

With this menu you can set the device's DMX starting address.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the desired DMX starting address. The adjustment range is
between 001-511.
04) Press the ENTER button to confirm your choice.

2.2. Channel mode

With this menu you can set the device's channel mode.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 channel modes: 6 and 10 channels.
04) Press the ENTER button to confirm your choice.
Ordercode: 43023
Stand-alone mode
DMX-512 mode
Channel mode
Master/Slave mode
Display ON/OFF
Sound-controlled mode
Code ON/OFF
Manual mode
, press the MENU button to access the device's settings.
. Press the UP/DOWN buttons to toggle between the following
.
14
.
.