Table of Contents
Advertisement
Astro 360 RGBW
2.8. Manual DMX adjustment mode
If Manual mode is active (see above), you will be able to manually adjust the values of the available
DMX channels. This mode will not work if Manual mode is switched OFF.
01) While in the main menu, press the UP/DOWN buttons until the display shows one of the following
options:
02) Once you have chosen the channel which you want to edit, press the ENTER button to open the
menu.
03) Press the UP/DOWN buttons to increase/decrease the channel value. The adjustment range is
between 0-255.
04) The channel functions are described in chapter DMX channels (see page 16).
DMX Channels
6 channels
Channel 1 – Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment between 0-127. The head can be turned by 360° and stopped at any position
you wish.
Counterclockwise continuous rotation between 128-191, from fast to slow.
Clockwise continuous rotation between 192-255, from slow to fast.
Channel 2 – Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 180° and stopped at any position you wish.
Channel 3 – LED rotation
Push the slider up, in order to rotate the LEDs.
Gradual head adjustment between 0-127. The head can be turned by 360° and stopped at any position
you wish.
Counterclockwise continuous rotation between 128-191, from fast to slow.
Clockwise continuous rotation between 192-255, from slow to fast.
Channel 4 – Dimmer
0-255
Dimmer intensity, from dark to bright
Channel 5 – Strobe
0-9
Not functional
10-255
Strobe flash frequency, from low to highest frequency
Channel 6 – Color chase
0-4
Not functional
5-255
Color chase, from slow to fast
Ordercode: 43023
Dimmer must be open
Dimmer must be open
.
16
Advertisement
Table of Contents
