SMC Networks EX12 SCS Series Operation Manual page 5

Operator
This operation manual is intended for those who have knowledge of machinery using pneumatic
equipment, and have sufficient knowledge of assembly, operation and maintenance of such
equipment. Only those persons are allowed to perform assembly, operation and maintenance.
Read and understand this operation manual carefully before assembling, operating or providing
maintenance to the product.
■Safety Instructions
■Do not disassemble, modify (including the replacement of the circuit board) or repair the product.
Otherwise, an injury or failure can result.
■Do not operate the product outside of the specifications.
Do not use the product with flammable or harmful fluids.
Fire, malfunction, or damage to the system can result.
Please check the specifications before use.
■Do not use in an atmosphere containing flammable or explosive gases.
Fire or an explosion may result.
This SI unit is not designed to be explosion proof.
■If using the product in an interlocking circuit:
Provide a double interlocking system, for example a mechanical system.
Check the product regularly for proper operation.
Otherwise malfunction can result, causing an accident.
■The following instructions must be followed during maintenance:
Turn off the power supply
Stop the air supply, exhaust the residual pressure in piping and verify that the air is released before
performing maintenance work.
Otherwise, injury can result.
Warning
-4-
No.EX※※-OMC0002-C