Multitek MULTIBUS MB-09 User Manual page 4

doorpanel block number is entered. The block number may be up to 30.
f)UNLOCK DURATION (DOOR UNLOCK DURATION)
Door release time of the door lock may be needed to adjust.
Bring the cursor UNLOCK DURATION line by playing up (2), down (8) keys.
Then press ENT. Adjust the time interval from 01 to 99 seconds using up (2), down (8) ,then press
ENT.
3.TO DEFINE A DOOR OPENING PASSWORD:
Each flat may define her password seperatelly.
Call the flat whose password will be defined .After the connection is established the person in the flat
presses F1 key.The person in front of the door panel enters 99 and 4 digit opening password .
99 + XYZT
Note: Consecutive digits like 1234 or 5678 may not be assigned as password. If the door panel gives an
error tone it means the password is not accepted.You need to re-enter new password.
Example:To define a door opening password to room number 2:
Call the room number 2 and establish the conversation.
Press F1 key on the monitor.Enter 99 + XYZT on the door panel side. xyzt becomes the password of
room number 2.
OPENING THE DOOR WITH THE PASSWORD :
Enter 99 + 4 digit number password with keypad of the door panel.
Example: If the password (of any room) is 1453 you enter the following digits to the door panel:
99 1453
The door opener is released.
NOTE: If there is a mistake CLR key can be used to clear.
4