Multitek MULTIBUS MB-09 User Manual page 2

MULTIBUS MB-09 and MB-10 DOOR PANEL USER MANUEL
Note: Some panels have ENT, CLR and some panels have ARA ,SIL buttons on the keypad.
ENT/ARA and CLR/SIL buttons have the same functions.
1. CALLING BY NAME:
Name list can be shown by pressing ENT key. Select the name using up (2), down (8), right (6), left
(4) keys
Dial the name by pressing ENT key.
2.
PROGRAMMING THE PANEL:
Main menu may appear by pressing ENT and 99 digits.
Software version can be shown, pressing ENT key when the arrow cursor is on the VERSION.
To enter to the program menu,bring the cursor on PROGRAM line by playing up (2), down (8) keys ,
then press ENT key.
PROG.PASSWD?
Then,you need to enter the program password of 4 digits.
Note: Default program password is 7447.
a) CHANGE PASSWORD (CHANGING PROGRAM PASSWORD)
Select the CHANGE PASSWORD line on the program menu, and press the ENT key and dial 4 digits
new password and press ENT.
Note: The consecutive digits like 1234 or 5678 may not be assigned as password. When you forget
your program password, please call authorized service.
VERSION
PROGRAM
CHANGE PASSWRD
DOOR NR
ENTER NAMES
CLEAR LIST
BLOCK NO
UNLOCK DURATION
2