Table of Contents
Advertisement
Setup Procedure
3.2 Installing the DAC39RF10EVM Configuration GUI Software
1. If installing the DAC gui for the first time, please download and install the FTDI drivers from
Restarting the PC may be required after installing the driver.
2. Download the Configuration GUI software from the EVM tool folder at
3. Extract files from the .zip file.
4. Run the executable file ( DAC39RF10.exe).
Figure 3-2. FTDI website to download and install the driver.
3.3 Connect the DAC39RF10EVM and TSW14J59EVM
1. With the power off, connect the DAC39RF10EVM to the TSW14J59EVM through the FMC+ connector as
shown in
DAC39RF10EVM Test
connector connections.
6
DAC39RF10EVM Evaluation Module
Setup. Make sure that the standoffs provide the proper height for robust
Copyright © 2023 Texas Instruments Incorporated
FTDI
DAC39RF10EVM
GUI.
SBAU395 – APRIL 2023
Submit Document Feedback
www.ti.com
website.
Advertisement
Table of Contents
