www.ti.com
4. Select the DAC39RF1x_JMODE0 device from the DAC select drop-down in the top left corner.
5. When prompted, click Yes to update the firmware(wait for Firmware to download).
If the user configures the EVM with options other than the default register values, different
instructions may be required for selecting the device in HSDC Pro. See
SBAU395 – APRIL 2023
Submit Document Feedback
Figure 3-7. Launching HSDCpro and Setup
Note
Copyright © 2023 Texas Instruments Incorporated
Setup Procedure
Section 7
for more details.
DAC39RF10EVM Evaluation Module
13