Table of Contents
Advertisement
Software Installation
3.2
Software Installation
Download the latest version of LDC1101EVM GUI software from http://www.ti.com/product/LDC1101. The
software must be installed before connecting the LDC1101 to your PC.
To install the LDC1101EVM software:
•
Connect to http://www.ti.com/products/LDC1101, and then scroll down to the Software Section to
download the latest LDC1101 software.
•
Unzip the downloaded file and run the installer file, named "Texas Instruments LDC1101 EVM GUI
Setup.exe"
The installer will run through a standard Windows program install process. By default, the installer places
the control application into C:\Program Files (x86)\Texas Instruments\LDC1101 EVM GUI. During the
install, the install location can be changed if desired, at the step shown below.
A shortcut to the application will be available in the Start Menu and on the Desktop.
After installation, connect the LDC1101EVM to the computer with a micro-USB cable. The PC will install
the communication driver the first time the board is connected to the PC.
When the Found New Hardware Wizard appears, select the "No, not this time", as the driver is already on
the computer.
During installation, the PC may warn that the driver is not compatible. This warning can be ignored; simply
press the "Continue Anyway" button to complete the installation. This will associate a COM Port with the
EVM.
12
LDC1101EVM PC Software (GUI)
Figure 3-2. Choose Install Location
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
SNOU137 – May 2015
Submit Documentation Feedback
Advertisement
Table of Contents
