Table of Contents
Advertisement
3.3 Assembly
Electric devices bear the risk of electric shock, short circuits,
overheating, fire, and explosion. This may lead to burns, severe
personal injury, or death.
• Do not use the instrument if it has been dropped or is damaged.
Use the MACS MiniSampler S with the autoMACS NEO Separator only. Do not
use other MiniSampler models. Every MACS MiniSampler S should be used
with one instrument only.
1
Make sure that the autoMACS NEO Separator is switched off.
2
Remove the MACS MiniSampler S from the packaging.
3
The receiving slot for the MACS MiniSampler S mounting bracket is located at
the front of the autoMACS NEO Separator. Tilt the MACS MiniSampler S and
slide the mounting bracket into the receiving slot until a resistance is met.
3
19
Advertisement
Table of Contents
