Miltenyi Biotec MACS MiniSampler S User Manual page 22

4
5
The MACS MiniSampler S is installed correctly when the boreholes in the
autoMACS NEO Separator and in the MACS MiniSampler S mounting
bracket are aligned.
6
3
7
8
9
20
Lower the MACS MiniSampler S to a horizontal position until it is locked.
Open the front cover of the autoMACS NEO Separator.
Secure the MACS MiniSampler S with the supplied knurled screw. Turn
the screw into the overlapping boreholes.
Close the front cover of the autoMACS NEO Separator.
Guide the power cable under the autoMACS NEO Separator.
Connect the power cable to the socket labeled Power CAN at the rear
panel of the autoMACS NEO Separator. Fasten the plug with its screws.