10 Mounting brackets for the protective cover are located on both sides of the
MACS MiniSampler S. Attach the cover from above. Keep it attached and
closed during operation. Fold the cover open to change racks and samples.
To disassemble the MACS MiniSampler S follow steps 3 to 10 in reverse order.
3.4 Switching on and off
When switching on the autoMACS NEO Separator the MACS MiniSampler S starts
automatically. Only during initialization the autoMACS NEO Separator recognizes
if a MACS MiniSampler S is connected.
The MACS MiniSampler S switches off automatically when the autoMACS NEO
Separator is shutting down.
3
21