Table of Contents
Advertisement
3.5 Installing racks
Risk of crushing or cutting due to moving parts.
• Keep away from the MACS MiniSampler S while the instrument is in
• Do not load or unload samples or racks while the instrument is in
The MACS MiniSampler S is compatible with the racks listed in Table 3.2.
When defining an experiment, racks must be selected in the Experiments
tab of the autoMACS NEO Separator user interface (refer to the autoMACS
NEO Separator user manual). After experiment start, the barcode of the racks
on the MACS MiniSampler S is checked to make sure that the previously
selected racks correspond to the installed racks.
3
1
22
operation.
motion.
Place a MACS Reagent Rack into the right recess of the
MACS MiniSampler S. Tilt the rack and push it slightly into the recess. The
engagement hook has to snap into the undercut.
Advertisement
Table of Contents
