Triumph Street Triple R Owner's Handbook Manual page 86

GENERAL INFORMATION
86
Lap Timer - Start Session
This function allows the lap timer
options to be set.
There are two options available:
AUTO LAP
▼
motorcycle odometer is used to
calculate
average speed. The lap distance
is accurate
(50 meters).
FIXED LAP DISTANCE - Allows the
▼
exact lap distance in yards or
meters to be set. The lap timer uses
the set distance to calculate a more
accurate average speed, compared
to Auto Lap Distance.
AUTO LAP DISTANCE
To set the auto lap distance:
Push the joystick up/down to select
▼
AUTO LAP DISTANCE and press the
joystick center to start the lap timer
session.
FIXED LAP DISTANCE
To set the fixed lap distance:
Push the joystick up/down to select
▼
FIXED LAP DISTANCE and press
the joystick center to confirm. The
UNITS and SET DISTANCE menus will
be shown.
MAIN MENU
START SESSION
AUTO LAP DISTANCE
FIXED LAP DISTANCE
BACK EXIT SELECT
DISTANCE -
the lap distance
to +/-54.7 yards
UNITS
SET DISTANCE
To manually input a measured distance:
Using the joystick left/right and up/
▼
down, input the measured distance
in meters or yards.
Press the joystick center to confirm.
▼
The
and
To start the lap timer, see page 99.
Lap Timer - Review
This function allows the rider to review
any stored sessions (see page 85).
To select the lap timer - review menu
the motorcycle must be stationary with
the ignition turned to the ON position.
Push the HOME button to show the
▼
MAIN MENU.
Push joystick up/down to select LAP
▼
TIMER and press the joystick center
to confirm.
MAIN MENU
FIXED LAP DISTANCE
UNITS
METRES
YARDS
FEET
BACK EXIT SELECT
MAIN MENU
FIXED LAP DISTANCE
SET DISTANCE
00761 METERS
BACK EXIT SELECT