Install and tighten the positive
▼
(+) terminal fastener to 40 lbf in
(40 lbf in (4.5 Nm)).
Install and tighten the negative
▼
(-) terminal fastener to 40 lbf in
(40 lbf in (4.5 Nm)).
2
3
IASM00157
1.
Battery strap
2.
Battery case locating feature (rear)
3.
Positive (+) terminal
4.
Negative (-) terminal
Cover the Positive (+) terminal with
▼
the protective cap.
IASM00155
1.
Positive (+) terminal cover
Reinstall the seat (see page 113).
▼
Note
Once the fuse has been reinstalled or
the battery reconnected the rider's
settings should be reset as noted.
4
1
1
MAINTENANCE
Fuses
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover).
Never replace a blown fuse with a fuse
of a different rating.
Use of an incorrect fuse could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Note
A blown fuse is indicated when all of the
systems protected by that fuse become
inoperative. When checking for a blown
fuse, use the tables to establish which
fuse has blown.
The fuse boxes are located underneath
the rider's seat. To allow access to the
fuse boxes, the rider's seat must be
removed (see page 112).
2
3
IASM00160
1.
Fuse box 1
2.
Fuse box 2
3.
Main fuse (30 Amp)
185
1