Coolant Change - Triumph Street Triple R Owner's Handbook Manual

Hide thumbs Also See for Street Triple R:
Table of Contents

Advertisement

To adjust the coolant level:
Allow the engine to cool.
The expansion tank cap can be
removed from the left hand side of
the motorcycle.
Remove the cap from the expansion
tank
and
add
through the filler opening until
the level reaches the MAX mark.
Reinstall the cap.
Note
If the coolant level is being checked
because the coolant has overheated,
also check the level in the radiator and
top off if necessary.
In an emergency, distilled water can be
added to the cooling system. However,
the coolant must then be drained and
replenished with D2053 OAT coolant as
soon as possible.

Coolant Change

It is recommended that the coolant
is changed by an authorized Triumph
dealer in accordance with scheduled
maintenance requirements.
Radiator and Hoses
Warning
The fan operates automatically when
the engine is running.
Always keep hands and clothing away
from the fan.
Contact with the rotating fan may
cause an accident and/or personal
injury.
coolant
mixture
MAINTENANCE
Caution
Using high pressure water sprays,
such as from a car wash facility or
household
pressure
damage the radiator fins, cause leaks
and impair the radiator's efficiency.
Do not obstruct or deflect airflow
through the radiator by installing
unauthorized accessories, either in
front of the radiator or behind the
cooling fan.
Interference with the radiator airflow
can cause overheating, potentially
resulting in engine damage.
Check the radiator hoses for cracks
or deterioration, and tension clips for
tightness in accordance with scheduled
maintenance requirements. Have your
authorized Triumph dealer replace any
defective items.
Check the radiator grille and fins for
obstructions
by
mud. Clean off any obstructions with a
stream of low pressure water.
washer,
can
insects,
leaves
or
147

Advertisement

Table of Contents
loading

This manual is also suitable for:

Street triple rsStreet triple moto2 edition

Table of Contents