Triumph Street Triple R Owner's Handbook Manual page 29

To adjust the brake lever:
Push the brake lever forward and
▼
turn the adjuster wheel to align one
of the numbered positions with the
arrow mark on the lever holder.
The distance from the handlebar
▼
grip to the released brake lever is
shortest when set to number five
and longest when set to number
one.
Street Triple RS and
Street Triple Moto2™ Edition
There are two adjusters installed to the
brake lever; a span adjuster and a ratio
adjuster.
2
3
1. Brake lever
2. Span adjuster
3. Ratio adjuster
Span Adjuster
The span adjuster allows the distance
from the handlebar to the brake lever
to be changed to suit the span of the
rider's hands.
GENERAL INFORMATION
To adjust the brake lever span:
Rotate
▼
counterclockwise
the distance to the handlebar or
clockwise to increase the distance
from the handlebar.
The distance from the handlebar
▼
grip to the released brake lever is
shortest when the span adjuster is
rotated fully counterclockwise.
Ratio Adjuster
The ratio adjuster moves the brake
master cylinder push rod to the left or
right in 0.04 in (1 mm) increments from
0.75 in (19 mm) to 0.83 in (21 mm).
To adjust the brake lever ratio:
Rotate the ratio adjuster to the
▼
1
rider's
ratio adjuster can be rotated both
clockwise and counterclockwise to
set the required preference.
An audible click can be heard when
▼
the ratio adjuster is locked into
position.
The ratio adjuster has three lever
▼
positions:
19 (0.75 in (19 mm)) for a softer brake
▼
feel with a longer lever travel
20 (0.79 in (20 mm)) for a firmer
▼
brake feel and a medium lever travel
21 (0.83 in (21 mm)) for a firm brake
▼
feel and a shorter lever travel.
the span
to decrease
preferred position.
29
adjuster
The