Installing Gsd Files - Pepperl+Fuchs LB8 09 Series Getting Started

GETTING STARTED
Integrating Remote I/O Stations with Com Unit LB/FB8X09* / LB/FB8X05*

3.2. Installing GSD Files

Before starting the installation, close the configuration window of the project within
the HW Config (see arrow in the graphic below).
1. To install the GSD files, select Options → Install GSD Files in HW Config:
2. Select the "Browse" button to navigate to the directory in which the files
were saved previously (see section 2). Select the .gsd file and start the
installation by selecting "Install":
3. Then update the device catalog.
Once the GSD files have been installed, this step can be skipped for future
projects.
7
Close before
starting the
installation