Table of Contents
Advertisement
GETTING STARTED
Integrating Remote I/O Stations with Com Unit LB/FB8X09* / LB/FB8X05*
3. Double-click on the service bus address of the com unit to set the desired
service bus address.
Double-click
6.5. How Can Values be Simulated?
The module must be connected, since the online menu differs from the offline menu.
1.
Module → Connect device.
2. Module → Parameter > Online Parameterization > Edit Device Data
(Online).
3. Select the desired channel in the Channel X tab.
4. Select the Simulation operating mode. Special analog values can be set
using the Expanded button.
35
Advertisement
Table of Contents
