Installing The Separation Wall - Pepperl+Fuchs LB Series Manual

LB Remote I/O System
Installation
3.5

Installing the Separation Wall

The separation wall is attached to the backplane between I/O modules with intrinsically safe
circuits and I/O modules with non-intrinsically safe circuits to ensure a clearance of 50 mm
between intrinsically safe circuits and other circuits.
Mounting on a Backplane without a Label Carrier
1. Position the pins on the separation wall over the plastic holders on the backplane.
2. Insert the pins on the separation wall into the plastic holders on the backplane, ensuring the
pins snap into place.
35