GETTING STARTED
Integrating Remote I/O Stations with Com Unit LB/FB8X09* / LB/FB8X05*
4.1.1. Adding an Interface
1. Start PACTware and update the device catalog via F3 → Update Device
Catalog. The device catalog may only be updated after the DTM has been
installed.
2.
on HOST PC to add another device:
3. Select the PROFIBUS communication interface:
4.
on your interface to parameterize it:
5. Adjust the baud rate to the speed of your PLC:
Select interface
Set the baud rate according to the PLC speed, set to
default values and apply
14