Table of Contents
Advertisement
GETTING STARTED
Integrating Remote I/O Stations with Com Unit LB/FB8X09* / LB/FB8X05*
2.3. Installing the Device Drivers (DTM Collection)
In addition to the PACTware FDT container, LB/FB 8X09 / LB/FB8X05 Com
Units require the correct device drivers (DTM). Visit
again and enter the term "dtm lb/fb" in the search field. The DTM Collection
can be downloaded by clicking the green "Download" button (see Fig. 6).
Figure 5: Downloading Microsoft .Net
Once the download is complete, run the application and follow the installation
instructions.
If an older version of the DTM is already installed on your computer, select the
option "Remove" when prompted during the installation routine and then install
the DTM Collection again (see Fig. 7).
Figure 6: Removing an older version of the DTM prior to installing the new version
Once you have reached the point at which you can select the elements to be
installed, select all elements (by checking the appropriate box for each of the
elements) and then continue with the installation.
www.pepperl-fuchs.com
5
Advertisement
Table of Contents
