Table of Contents
Advertisement
GETTING STARTED
Integrating Remote I/O Stations with Com Unit LB/FB8X09* / LB/FB8X05*
6.3. How Do I Determine the Service Bus Address of the Com Unit?
When configuring via PROFIBUS (e.g., with Softing PROFIusb), determination of
the service bus address is generally not relevant.
When configuring via the service bus interface (e.g., with ICPCON), this is
performed as follows:
1.
on Service Bus Interface LB/FB Series → Connect to connect.
2. The service bus address can then be determined via:
Service Bus Interface LB/FB Series → Additional Functions →
Scan Service Bus:
Scan over a sufficient range
33
Advertisement
Table of Contents
