GETTING STARTED
Integrating Remote I/O Stations with Com Unit LB/FB8X09* / LB/FB8X05*
Example LB station: Basis station with modules
Bus coupler
Example of a non-redundant LB remote I/O station in HW Config
3.4. Loading Hardware Data onto the CPU
Once the appropriate modules have been added to the remote I/O station in the
Simatic Manager, data can be loaded onto the CPU of the PLC.
1. Save and compile your project:
2. Load the data onto the CPU of the PLC:
3. Confirm with OK and then always click Yes/OK so that the PLC restarts
and adopts the changes:
E/A modules
Power supply
11