Salicru EQUINOX EQX2-4002-T Quick Manual page 70

12. ANNEX II: LED INDICATORS AND USING THE 485/WIFI 24H EQX2-T
COMMUNICATION MODULE.
The LEDs on the display will appear in one of three different states: on, off, or flashing.
LED off
LED flashing
LED on
The inverter uses different combinations of LEDs to indicate different situations:
LED Indicator
Power Power supply
Net Operation
Communication
Active with the router/
Communication
with the
Link
EQUINOX22 solar
inverter
Tab. 2. LED indicators.
70
LED status
Device without power supply.
Device with correct power supply.
The device is not working correctly.
Device operating correctly.
The device is not working correctly.
Communication with server not established.
Connection to router established. Error in connection to the server.
server
Communication with server established.
Communication with the EQUINOX22 solar inverter not established.
Ensure that the Modbus address has been entered correctly in the
inverter. See section 5, step 2.
Establishing communication with the EQUINOX22 solar inverter.
Communication with the EQUINOX22 solar inverter established.
Description
SALICRU