Advertisement
Available languages
Available languages
9. CONNECTING TO THE 485/WIFI
24H EQX2-T COMMUNICATION
MODULE AND CONFIGURATION.
Throughout the entire process, the inverter must be supplied with power from the solar field.
Tap on the installation that has been created to access its details:
At this point, only the solar field output will be
displayed because the measuring instruments
are not yet connected, as indicated by the message
"Devices offline" at the top of the overview diagram.
The ESM3T EQX2 network analyser is already
physically connected to the 485/WIFI 24H
EQX2-T communication module, so only the latter needs
to be paired.
Add a device to the created installation: tap the "properties" button
[ ] to the right of the installation name.
58
SALICRU
Advertisement
