Salicru EQUINOX EQX2-4002-T Quick Manual page 40

1. CONTENTS.
Ensure you have the following components according to the option chosen: zero feed-in, with or without 24H monitoring.
Item
1
2
3
4
5
In addition, you will need the following material that is
Cable 1: RS485 Ethernet twisted-pair communications cable or
equivalent, 0.25 mm
the two cables to connect to the RS485+ and RS485- ports of the 485/
WIFI 24H EQX2-T, and the other with an RJ45 connector to connect
to the RJ45 port of the ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2
network analyser.
Cable 2: RS485 twisted-pair shielded communications cable, 0.25 mm
cross-section
Cable 3: RS485 twisted-pair shielded communications cable, 0.25 mm
cross-section.
Network cable (L-N) with a 1.5 mm
WIFI 24H EQX2-T communication module.
Network cable (L1, L2, L3, N) with a 1.5 mm
ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2 network analyser.
40
1
3
ESM3T 90D24 EQX2 o ESM3T 300D50 EQX2 network analyser
Set of 3 pre-wired and calibrated current transformers (accessory to
485/WIFI 24H EQX2-T communication module (option for 24H communications)
Long-range antenna (accessory to
Short-range antenna (accessory to
Description
cross-section with RJ45 connector. One end with
2
cross-section to supply the 485/
2
cross-section to supply the
2
2
4
Description
)
3
)
3
not supplied
to install the devices:
Length equivalent to the distance between the ESM3T
90D24 EQX2 network analyser and the 485/WIFI 24H EQX2-T
communication module.
Length equivalent to the distance between the EQUINOX2
2
solar inverter and the ESM3T 90D24 EQX2 network analyser.
Length equivalent to the distance between the EQUINOX2
2
solar inverter and the 485/WIFI 24H EQX2-T communication
module.
0.3 m - or length equivalent to the distance between the
mains supply and the 485/WIFI 24H EQX2-T communication
module.
0.3 m - or the length equivalent to the distance between the
protection components on the switchboard between which
the devices are inserted.
5
)
1
Length
Quantity
1
1
1
1
1
SALICRU