Platen Roller - Canon RP10 User Manual

C
Blow off adhering substances using a blower, etc., or
remove them by lightly wiping with a cotton swab, etc.
Paper sensor
D
Load paper.
E
Close the Paper Cover.
F
Perform a test print to check that the printer is functioning
properly.

Platen Roller

If foreign substances such as paper chips adhere to the Platen Roller,
paper feed or print quality problems may occur. If they adhere to the
Platen Roller, follow the steps below to clean it.
IMPORTANT
• Do not wipe off the yellow grease applied to the platen gear. Doing so
may shorten its life.
• Do not use solvents, etc.
A
Push the Cover Open Lever down to open the Paper
Cover.
B
Lightly wipe the platen surface with a soft, dry cloth to
remove the stains.
Platen Roller
C
Close the Paper Cover.
D
Perform a test print to check that the printer is functioning
properly.
26