ASDA-B3
2.4.2 Mounting directions and precautions for the servo motor
You can install the servo motor horizontally or vertically.
Mounting direction
Horizontal
Vertical - shaft end up
Vertical - shaft end down
Note: if you desire to install gears on the servo motor, follow the manufacturer's instructions for installation.
If you are using a servo motor with an oil seal, refer to Section
2.4.5 for oil and water prevention measures for the servo motor.
Do not mount the servo motor with an oil seal in the direction
with the shaft end up.
When wiring, you need to install an oil trap (marked as (1) in
the figure on the left) to prevent water vapor from entering
the motor.
When installing the servo motor in a machine (such as in a
gearbox), you must adhere to the measures in Section 2.4.5
to prevent oil and gas from entering the servo motor.
( ) 1
If you are using a servo motor with an oil seal, refer to Section
2.4.5 for oil and water prevention measures for the servo motor.
Precautions
Installation
2
2-9