Parameter Setting Procedure - Delta ASDA-B3 Series User Manual

ASDA-B3

4.2 Parameter setting procedure

Switching modes:
Power On
Monitoring
mode
Parameter
mode
Alarm mode
Operating in each mode:
Monitoring mode
Refer to Chapter 8.
MODE
Refer to Chapter 8.
1. If no alarm occurs, Alarm mode is skipped.
MODE
2. When a new alarm occurs, the display switches to Alarm
mode from any other mode.
3. When switching to a different mode, if you do not press
a key within 20 seconds, the display returns to Alarm mode.
MODE
See Chapter 13 for detailed alarm information.
Monitoring
mode
Test Operation and Panel Display
1. Press keys to select monitoring
variables. Refer to Section 4.3.5 for
detailed information.
2. Directly enter the code of
monitoring variables via P0.002.
Refer to Chapter 8 for a detailed
description of P0.002.
3. Press the SHIFT key to switch the
display of high and low words of
monitoring variables.
4
4-3