Table of Contents
Advertisement
Coordination modes
*1
: Only available for the HT20
Ethernet
Standard
Communication mode
Connector
* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
Security
IEEE802.1X; requires the connected device to comply with IEEE802.1X
IPsec/IP Filtering
SSL/TLS; either HTTPS Server/Client or IPPS
SMTPS (StartTLS, SSL/TLS)
SNMPv3
Parent topic:
Technical Specifications
Infrastructure mode
Wi-Fi Direct (Simple AP)
Note: Wi-Fi Direct Simple AP mode is available even if you connect
the product to an Ethernet network. Wi-Fi Direct is not supported on
IEEE 802.11b.
IEEE802.3i (10BASE-T)*
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)*
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
272
Advertisement
Table of Contents
