Adjusting Power Saving Settings; Importing And Exporting Product Settings - Epson WorkForce Pro WF-C5310 User Manual

Note: To clear the email notification settings, select Restore Default Settings. This clears all email
notification settings, not just the changes made in the current session.
Parent topic:
Related tasks
Accessing the Web Config Utility

Adjusting Power Saving Settings

The product can automatically enter sleep mode or turn off after it has not been used for a while. You
can set the delay before the product enters sleep mode or turns off.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Power Saving setting.
3. Set Sleep Mode to the number of minutes before the product enters a low-power mode.
4. Select Power Off Timer to set the amount to time of inactivity before the product turns off.
Note: If you are using the fax feature, select None.
Note: You can also configure the power saving settings using the control panel by selecting Settings >
General Settings > Basic Settings and selecting the feature you want to change.
Parent topic:
Related tasks
Accessing the Web Config Utility

Importing and Exporting Product Settings

Follow the instructions in these sections to import and export your product's settings using the Web
Config software.
Exporting Settings Using Web Config
Importing Settings Using Web Config
Parent topic:
Related tasks
Accessing the Web Config Utility
Configuring Product Settings
Configuring Product Settings
Configuring Product Settings
197