Epson WorkForce Pro WF-C5310 User Manual page 193

Setting
Secondary DNS Server
DNS Host Name Setting
DNS Host Name
DNS Domain Name Setting
DNS Domain Name
Register the network interface
address to DNS
Proxy Server Setting
Proxy Server
Proxy Server Port Number
Proxy Server User Name
Proxy Server Password
IPv6 Setting
IPv6 Privacy Extension
IPv6 DHCP Server Setting
Description
Enter the address of the secondary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
Sets the DNS Host Name selection method
Displays the current DNS Host Name.
Sets the DNS Domain Name selection method
Specifies the DNS domain name. The name must conform to
the following format:
• Enter between 2 and 249 characters using only the
characters "A-Z", "a-z", "0-9", hyphen "-", and a period "."
• The first character cannot be a "0-9", hyphen "-", or a
period "."
• The last character cannot be a hyphen "-" or a period "."
• Each label in the domain name must be between 1 and 63
characters and separated by a period.
• The total number of characters in the host and domain
name must not exceed 251.
Allows you to register the host and domain names through a
DHCP server that supports Dynamic DNS
Enables the use of a proxy server
Specifies the name of the proxy server in either IPv4 or
FQDN format
Specifies the port number for the proxy server (between 1
and 65535)
Specifies the user name for the proxy server (0-255 ASCII
characters [0x20-0x7E])
Specifies the password for the proxy server (0-255 ASCII
characters [0x20-0x7E])
Enables the use of IPv6 addressing
Enables the use of private IPv6 addresses
Enables the use of a IPv6 DHCP server
193