Incorrect Image Size Or Position; Slanted Printout - Epson WorkForce Pro WF-C5310 User Manual

Parent topic:

Incorrect Image Size or Position

If your printed image is the wrong size or in the wrong position, try these solutions:
• Make sure you selected the correct paper size and layout settings in your printing program and printer
software.
• Make sure you selected the correct paper size on the control panel.
• Make sure your paper is positioned correctly for feeding into the printer.
• Make sure you selected the correct margins for your paper size in your printing program.
You can use the preview option in your printer software to check your margins before you print.
Parent topic:
Related references
Paper or Media Type Settings - Printing Software
Related tasks
Selecting the Paper Settings for Each Source - Control Panel
Loading Paper in the Paper Cassettes and Rear Paper Tray

Slanted Printout

If your printouts are slanted, try these solutions:
• Make sure the paper is loaded in the correct direction.
• Make sure your paper meets the specifications for your product.
• Slide the edge guides against the edges of the paper.
• Make sure the paper type setting matches the type of paper you loaded.
• Select a higher print quality setting in your printer software.
• Turn off any high speed settings in your product software.
• Align the print head.
• Adjust the print quality.
• If aligning the print head did not improve the quality, disable the Bidirectional Printing setting.
• Make sure the product is not printing while tilted or at an angle.
Parent topic:
Solving Page Layout and Content Problems
Solving Page Layout and Content Problems
Solving Page Layout and Content Problems
253