Configuring A Certificate For An Ieee 802.1X Network; Ieee 802.1X Network Status - Epson WorkForce Pro WF-C5310 User Manual

Configuring a Certificate for an IEEE 802.1X Network

If your product supports IEEE 802.1X, you can configure a certificate for the network using Web Config.
1. Access Web Config and select the Network Security tab.
2. Under IEEE802.1X, select Client Certificate.
3. Click Import to add a new client certificate.
4. Click OK.
Parent topic:

IEEE 802.1X Network Status

You can check the status of the IEEE 802.1X network settings by printing a status sheet from your
product.
The network status sheet displays the information in this table for IEEE 802.1X networks.
Status ID
Disable
EAP Success
Authenticating
Config Error
Client Certificate Error
Timeout Error
User ID Error
Server ID Error
Server Certificate Error
CA Certificate Error
Connecting the Product to an IEEE 802.1X Network
Status description
IEEE 802.1X is disabled
IEEE 802.1X authentication is confirmed and the network connection is
available
IEEE 802.1X authentication in progress
Authentication failed because the user ID was not set
Authentication failed because the client certificate is out of date
Authentication failed because there is no answer from the RADIUS server
and/or authenticator
Authentication failed because the product's user ID and/or certificate
protocol is incorrect
Authentication failed because the server ID on the server certificate and
the server's ID do not match
Authentication failed because the server certificate is out of date or the
chain of the server certificate is incorrect
Authentication failed because the CA certificate is incorrect, not imported,
or out of date
222