Synchronizing The Date And Time With A Time Server; Clearing The Internal Memory - Epson WorkForce Pro WF-C5310 User Manual

2. Click Start to check for the latest firmware.
3. If there is a firmware update, click Start to begin the update.
Note: Make sure the product is not in use and clear any errors on the LCD screen before starting the
update. You can also schedule a firmware update by selecting Automatic Firmware Update from
the menu.
Parent topic:
Related tasks
Accessing the Web Config Utility

Synchronizing the Date and Time with a Time Server

You can synchronize the product with an NTP time server to set the date and time on the product.
Note: If you are using a CA certificate or Kerberos authentication, it is recommended to use a time
server to set the date and time.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Date and Time > Time Server setting.
3. Set Use Time Server to Use.
4. Enter the time server address in Time Server Address. You can use the IPv4, IPv6, or FQDN
format for the address. You are limited to 252 characters.
5. Enter an update interval (up to 10080 minutes) in Update Interval (min).
6. Click OK to update the settings.
Parent topic:
Related tasks
Accessing the Web Config Utility

Clearing the Internal Memory

You can delete the contents of the product's internal memory, such as password-protected print jobs and
downloaded PCL fonts and macros using the Web Config interface. You cannot select individual items to
delete.
1. Log in to the Web Config interface as an administrator.
Configuring Product Settings
Configuring Product Settings
199