Epson WorkForce Pro WF-C5310 User Manual page 195

Setting
IPv6 Secondary DNS Server
IEEE802.11k/v
IEEE802.11r
Wired LAN
Setting
Link Speed and Duplex
IEEE 802.3az
Wi-Fi Direct
Setting
Wi-Fi Direct
SSID
Password
Frequency Range
IP Address
Parent topic: Managing the Network Connection
Description
Specifies the address for the IPv6 secondary DNS server.
The address must conform to the following format:
• xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
• xxxx is a hexadecimal number from 1 to 4 digits
• If there are consecutive blocks where xxxx is all zeros, it
can be omitted as ::. (Only one block can be omitted)
Enables the use of IEEE802.11k/v network environments
Enables the use of IEEE802.11r network environments
Description
Selects the communication mode for the wired connection
Enables the use of IEEE 802.3az network environments
Description
Enables the product's Wi-Fi Direct network
You can change part of the SSID for the product.
Specifies the password for the Wi-Fi Direct network.
Note: Changing the password will disconnect any devices
currently connected to the network.
Selects the frequency range used by the Wi-Fi Direct
network.
Specifies the IP address for the Wi-Fi Direct network. If set to
Manual, enter the IP address in the provided fields.
195