Epson WF-C579R User Manual

WF-C579R
Start Here
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User's Guide.
This printer is designed for use with Epson
Note:
only, not third-party ink. For important ink information, visit
www.latin.epson.com/tintaepson or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
࡟ Do not use the Epson product near water.
࡟ Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
1
Unpack
The product is heavy and should be lifted and moved by
Warning:
two people.
1
Remove all protective materials from the product.
Keep the two protective pieces shown after removing them
Note:
from inside the product. You will need them if you transport your
product. See your product's online User's Guide for transportation
instructions.
ink packs
®
When using telephone equipment, you
2
Lift up the scanner unit and remove all protective materials
from inside the product, then close the scanner unit.
3
If your product has an additional paper cassette unit, place
the product on the included paper cassette unit as shown
and attach the included sticker.
4
Insert the output tray, then set it down gently.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Do not connect to your computer yet.
Caution:
2
Turn on the product.
If an error code appears, turn off the product and check that
Note:
no protective material has been left inside the product.