Configuring Product Settings; Checking Status Information - Epson WorkForce Pro WF-C5310 User Manual

4. Do one of the following:
• If you have set an administrator password before, enter the current password, then enter and
confirm the new password in the fields provided.
• If you have not set an administrator password before, enter a new password and confirm it in the
fields provided.
5. Click OK.
Note: To restore the administrator password to the default value, select Restore Default Settings on
the Change Administrator Password screen.
Parent topic:

Configuring Product Settings

Follow the instructions in these sections to configure your product's control panel settings using the Web
Config software.

Checking Status Information

Managing the Network Connection
Setting Control Panel Options
Sending Email Notifications
Adjusting Power Saving Settings
Importing and Exporting Product Settings
Updating Firmware Using Web Config
Synchronizing the Date and Time with a Time Server
Clearing the Internal Memory
Enabling Periodic Cleaning
Powering Off or Rebooting the Product Remotely
Restoring Default Product Settings
Parent topic:
Checking Status Information
You can check information about the printer using the Web Config interface.
Note: Depending on the features of your product, not all of the options below may be available. Some
options are not available unless you are logged in to the Web Config interface.
Administering Your Product
Administering Your Product
190