Settings - System settings - Access Point - Software access point settings
These settings are performed when using the cable LAN cable set (OT-WLO1) as the software access point.
This function can be used with Windows Embedded POSReady 7 OS and TM-DT software of Ver. 3.0 or later.
Item
Disable
Enable
SSID
Password
Apply
Settings - System settings - Date and time - Time settings
Performs time settings for this product.
Item
Date and time
Time Zone
Automatically adjust clock for Daylight Saving
Time
Use Time Server
Time Server
Apply
Chapter 4 System Development Using TM-DT Software
Description
Renders the software access point invalid.
Validates the software access point.
Enter the software access point password.
The initial setting is below.
TM-DT-<product's serial number>
Register the software access point password.
This is not configured in the default settings. In this case, this product
automatically generates and prints a password.
Registers the settings to this product.
Description
Sets the time and date.
Sets the area. Sets the time difference from Coordinated Universal Time.
Selects whether to automatically adjust the clock for Daylight Saving
Time.
Selects whether to use a time server.
Specifies the URL for the time server.
Registers the settings to this product.
4
114