ClearOne Tabletop Controller User Manual page 25

RAMP - RAMP GAIN ADJUSTMENT
This command starts/stops the gain ramp for an input, output, or assignable processing block. There is no
query for this command.
Command form: DEVICE R R AMP <Channel><Group><Rate>[Target]
Argument D D etails
Name Description
Device 0–7 or * to select all units
RAMP Command
Channel See Groups and Channels in your XAP User's Manual
Group I, O, M, L, P , T, R (1, 2, 3, 5, 16, 17)
Rate -50 to 50
If value = 0. the ramp will stop
If value < 0, the gain will ramp down
If value > 0, the gain will ramp up
Target -65 to 20
If null in text, the ramp will use the
channel's maximum and minimum for
a target
Example: #57 R R AMP 5 5 L L 6 6 1 1 2 On XAP 800 unit 7 (#57), the gain (RAMP) on Line Input 5 will increase
at a rate of 6dB/sec until the 12dB point is reached.
SPEEDDIAL - SPEED DIALING
This command dials a speed dial number.
Command form: DEVICE S S PEEDDIAL <Channel> [Value]
Argument D D etails
Name Description
Device 0–7 or * to select all units
SPEEDDIAL Command
Channel See Groups and Channels in your XAP User's Manual
Value 1 – 10, Null to query in text
Example: #71 S S PEEDDIAL 1 1 5 On XAP 400 unit 1 (#71), SPEEDDIAL the hybrid (1) with the number
stored in location 5.
Unit
dB/s
dB
Chapter 5: Appendix 25