Chapter 3: Using The Tabletop Controller - ClearOne Tabletop Controller User Manual

CHAPTER 3: USING THE TABLETOP CONTROLLER

TO ANSWER A CALL
1. Press on the controller to answer the call. When there is an incoming call, you will see "ringing" on the.
controller display and the phone icon flashes.
TO MAKE A CALL
1. Press . You will hear a dial tone.
2. Dial the number as you would on a standard phone. The number appears on the LCD screen.
> Note: The controller accepts a maximum of 44 pre-dialed characters. No more than 44 characters can be
entered.
TO PRE-DIAL A CALL
1. Dial a phone number. You can press the asterisk
pre-dialing string.
2. Press to send the call.
> Note: Pressing and holding the asterisk (*) key for two seconds will delete the entire dial string. Pressing
and holding the pound (#) key for two seconds will insert a pause into the dialing string. The duration of
the pause is two seconds.
TO END A CALL
1. Press to disconnect the call.
TO MUTE/UNMUTE MICROPHONES
1. Press to mute the microphones.
2. Press again to unmute the microphones.
TO REDIAL A PHONE NUMBER
1. Press .
> Note: REDIAL saves the last number that was dialed from the controller. Once REDIAL is pressed, the
phone will be taken off-hook and the number will be dialed.
(CLEAR) to delete the last digit entered in the
*
Chapter 3: Using the Tabletop Controller 15