ICPDAS DL-100-E User Manual page 68

Address Description
00001 ~ Digital output value of channel 0 to 1
00002 If relative humidity alarm is enabled, then the
digital output of channel 0 is used as its alarm.
If temperature alarm or dew point alarm are
enabled, then the digital output of channel 2 is
used as their alarm.
00129 ~ Safe value of digital output channel 0 to 1
00130
00161 ~ Power on value of digital output channel 0 to 1
00162
00227 Write 1 to reload default TCP settings and reboot
module
00234 Write 1 to reboot module
00280 Write 1 to clear all high latched analog input
values
00281 Write 1 to clear all low latched analog input
values
00289 ~ Low alarm status of channel 0 to 4. Write 1 to
00293 clear low latched alarm.
00305 ~ High alarm status of channel 0 to 4. Write 1 to
00309 clear high latched alarm.
00321 ~ Enable/disable alarm of channel 0 to 4
00325
00337 ~ Alarm type, momentary or latched, of channel 0
00341 to 4
00385 ~ Write 1 to clear high latched analog input value of
00389 channel 0 to 4
00417 ~ Write 1 to clear low latched analog input value of
00421 channel 0 to 4
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual
Attribute
R/W
R/W
R/W
W
W
W
W
R/W
R/W
R/W
R/W
W
W
Version 1.1.3 Dec 2020 - 68 -