I/O Settings - ICPDAS DL-100-E User Manual

3.6 I/O Settings

Users can change the temperature unit to Fahrenheit or Celsius in this field.
All the settings take effect after clicking the Update Settings button.
Item Description
Alarm Mode - Disabled:
Disables alarm function.
- Momentary:
If a measurement value higher than the High Alarm Limit
or lower than the Low Alarm Limit, the alarm occurs until
the measurement value is within a range from Low Alarm
Limit to High Alarm Limit.
- Latched:
If a measurement value higher than the High Alarm Limit
or lower than the Low Alarm Limit, the alarm occurs.
Low Alarm Sets the Low alarm limit conditions for Relative Humidity/
Limit Temperature/ Dew Point.
High Alarm Sets the High alarm limit conditions for Relative Humidity/
Limit Temperature/ Dew Point.
Beep On Enable/disable beep on alarm for Temp /RH /Dew point
Alarm
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 28 -
Default
Disabled