ICPDAS DL-100-E User Manual page 31

Item Description
Status - Running: the data logger is running
- Stopped: the data logger is stopped
Change Sets the mode for data logger
Logging
- Stop: stops the data logger
- Run: continues logging data
- Period: logs data in the specified period time
Overwrite Sets whether to overwrite old data by new ones when the
on Full memory for data storage is full. (Over the upper limit of
600,000.)
- No: discards the new data (default)
- Yes: overwrites the old data by new ones
Sampling Sets the time interval for logging data. It is valid for both Run
Interval mode and Period mode.
- Sampling Interval – Hour: sets the hour for log interval
- Sampling Interval – Minute: set the minute for log interval
- Sampling Interval – Second: sets the second for log
interval
Period Sets the start time for Period mode.
Start
Period End Sets the stop time for Period mode
Note that all settings will take effect immediately after clicking the Update Settings
button.
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 31 -
Default
Stop
No
10 (s)