ICPDAS DL-100-E User Manual page 11

Installation procedure:
To install the waterproof connector, follow the procedure described below.
Step 1: Remove the RJ-45 Connector from the RJ-45 Cable
Step 2: Feed the end of the two core power cable through the Sealing Nut, Seal, Lock
Nut, Clamp Ring and Gasket
Lock Nut
Sealing Nut
Gasket
Clamp Ring
Seal
Step 3: Wrap the Gasket around the Clamp Ring
Step 4: Wrap the Lock Nut around the Clamp Ring
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 11 -