Q3: How To Clear The Data Logged In A Dl-100-E Module; Q4: How To Download Firmware Into A Dl-100-E Module - ICPDAS DL-100-E User Manual

Q3: How to clear the data logged in a DL-100-E module?

A3: Enter the IP address for the module in the address bar of a web browser and go to
the I/O Settings page, click the Reset Data Logger button at the bottom of the page.

Q4: How to download firmware into a DL-100-E module?

1. Setting up the DL-100-E
Before updating the firmware, ensure that the network settings for both your
host computer and any DL-100-E modules are correctly configured, or the
update procedures via the Ethernet network may not function correctly.
Step 1: Download and Install the eSearch Utility (version is v1.1.14 or later) on your
Host PC, and then run the Utility to search for DL-100-E modules connected to
the network.
Download and install the eSearch utility.
http://ftp.icpdas.com/pub/cd/iiot/utility/esearch/
Run the eSearch utility. Click on the Search Server button and it should find the
DL-100-E module.
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 54 -