Configuration Via Rs-485(Dl-110-E / Dl-120-E Only); Building The Rs-485 Connection - ICPDAS DL-100-E User Manual

4. Configuration via RS-485(DL-110-E / DL-120-E Only)

The factory default settings for RS-485 communication

Address: 1

Protocol: Modbus/RTU
 Baudrate: 9600
 Parity: N,8,1

Response Delay (ms): 0
Note
If there are multiple DL-110-E loggers connected to the same RS-485
network, each logger needs be set with a unique RS-485 address. More than
one module having the same address will cause communication failure

4.1. Building the RS-485 Connection

1. Download the DCON Utility Pro from
http://ftp.icpdas.com/pub/cd/iiot/utility/dcon_utility_pro/
2. Launch the DCON_Utility_Pro.exe.
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual
Stop Search
Start Search
Set COM port Configuration
Version 1.1.3 Dec 2020 - 35 -