ICPDAS DL-100-E User Manual page 29

Set the Power On Value and Safe Value for the relay output, and the Host Watchdog
Timeout timer for Ethernet communication; if a host does not send a command over the
setting time, the Host Watchdog timeout occurs and the relay outputs the status set for
Safe value. The settings for Power On Value and Safe Value are unavailable when any
one setting in the Alarm Mode is enabled
All the settings take effect after clicking the Update Settings button.
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 29 -