Configuration Via Web Browser; Search The Dl-100-E Series Module Logger - ICPDAS DL-100-E User Manual

3. Configuration via Web Browser

The DL-100-E series logger has a built-in web server that provides simple web pages
for remote monitoring real-time data and configuring the logger with a standard browser.
For opening the web page in DL-100-E series module, the factory default IP address
(192.168.255.1), Subnet Mask (255.255.0.0) and Gateway (192.168.0.1) need be set
to available IP/Subnet Mask/Gateway addresses in your Ethernet environment. The
Ethernet configuration can be set by entering the Settings menu from the web pages.

3.1 Search the DL-100-E series module logger

eSearch is designed to search out the DL-100-E series logger connected on the same
Ethernet network, it supports for Linux and Windows and is needless to install.
The eSearch can be downloaded from
http://ftp.icpdas.com/pub/cd/iiot/utility/
Before running eSearch, turn off firewall on computer, and connect the computer and
DL-100-E logger to Ethernet network.
1. Launch eSearch, click the Search Servers button to search the DL-100-E modules
connected to the network, the modules searched out will be listed as below.
2. Double click the module name searched in the list.
3. Set available IP Address, Sub-net Mask, Gateway (designated by your network
administrator) and alias and click the OK button. The Alias for easy to identify each
item will be shown at the bottom-left corner of the DL-100-E screen.
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 20 -