ICPDAS DL-100-E User Manual page 38

9. The DL-110-E logger searched out will be listed as below.
10. Click the module name to configure the logger.
Not
The Protocol/Baud Rate/Parity/Checksum items marked with "(INIT*)"
e
means that when any of those items needs be modified, the pin 4.INIT needs
to be set in ON position and power cycle the logger, then the item can be
modified. After complete setting, set the pin 4.INIT back to OFF position and
power cycle the logger again to take the setting effect.
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 38 -